Mellanox MLNX-OS Switch Management
myswitch login: admin
Password:
Last login: Wed Dec 30 19:18:05 on ttyS0
Mellanox Switch
Configuration wizard
Do you want to use the wizard for initial configuration?
Initializing zero-touch
y
Step 1: Hostname? [myswitch] mellanox0a
Step 2: Use DHCP on mgmt0 interface? [yes] yes
Step 3: Enable IPv6? [yes] yes
Step 4: Enable IPv6 autoconfig (SLAAC) on mgmt0 interface? [no]
Step 5: Enable DHCPv6 on mgmt0 interface? [no]
Step 6: Admin password (Enter to leave unchanged)?
Step 6: Confirm admin password?
You have entered the following information:
1. Hostname: mellanox0a
2. Use DHCP on mgmt0 interface: yes
3. Enable IPv6: yes
4. Enable IPv6 autoconfig (SLAAC) on mgmt0 interface: no
5. Enable DHCPv6 on mgmt0 interface: no
6. Admin password (Enter to leave unchanged): (CHANGED)
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Configuration changes saved.
To return to the wizard from the CLI, enter the "configuration jump-start"
command from configure mode. Launching CLI...
System is initializing!
This may take a few minutes
Modules are being configured
```